|
| Siemens
PLC -
S7 200 ,
S7 300, S7 400 |
SIMATIC S7-200
Micro PLC for
less complex automation tasks
| SIMATIC S7-200 applications range
from replacing relays and contactors to handling
less complex automation tasks in standalone
mode, in networks and within distributed
configurations.
To save costs, the S7-200 is
increasingly being employed in areas that
previously required special
electronics. |
 |
In addition to the comprehensive basic
functionality of the five available CPUs a wide
range of I/O and function modules provides
solutions tailored to the customers requirements.
(Siemens S7-200) |
|
| |
SIMATIC S7-300
The modular
controllers for innovative system solutions in the
manufacturing industry
The SIMATIC S7-300 has been designed
for innovative system solutions with the focus
on manufacturing engineering, and as a universal
automation system, it represents an optimal
solution for applications in centralized and
distributed configurations:
|
 |
The
product range comprises 7 Standard CPUs, 6 Compact
CPUs, 6 failsafe CPUs and 2 Technology CPUs.
(Siemens S7-300)
Highlights
 | The ability to integrate
powerful CPUs with Industrial Ethernet/PROFINET
interface, integrated technological functions,
or fail-safe designs make additional investments
unnecessary. |
| The S7-300 can be set
up in a modular configuration without the need
for slot rules for I/O modules. There is a wide
range of modules available both for the
centralized and the distributed configuration
with ET 200M. |
| The Micro Memory Card as a
data and program memory makes a backup battery
superfluous, and with it, part of the
maintenance costs. In addition, an associated
project, including symbols and comments, can be
stored on this memory card to facilitate service
calls. |
| The Micro Memory Card also
enables simple program or firmware updates. The
Micro Memory Card can be used during operation
for storing and accessing data, e.g. for
measured value archiving or recipe processing.
|
| In addition to standard
automation, safety technology and motion control
can also be integrated in an S7-300. |
| Many of the S7-300 components
are also available in a SIPLUS version for
external environmental conditions, e.g. extended
temperature range (-25...+60 ?ラ and for use
where there is aggressive
atmosphere/condensation. |
|
|
|
Siemens
Logo! |
|
 |
| Always right - LOGO! Basic & LOGO!
Pure |
| 8 digital inputs
(incl. 2 AI at 12/24 V DC) and 4 digital outputs
on board |
| Display of
message texts, actual and setpoint values, as
well as direct modification of values on the
display (not applicable to Pure models) saves
the need for a separate display
|
| Automatic
daylight saving adjustment reduces maintenance
overheads |
| Password
protection protects your know-how
|
| 36 pre-tested
functions integrated, i.e. no additional
devices, such as elapsed-hour meters,
required |
| Supports linking
of 130 functions so that a wide range of
applications can be implemented without
restrictions |
| Integrated data
latch ensures total security of current values
in the event of a power failure
|
| Supports
flexible expansion up to 24 DI, 16 DO, 8 AI, 2
AO; i.e. suitable for a wide range of
applications, which means protection of original
investment |
| | |
 SIMATIC ET 200
Distributed I/O with local
intelligence
With SIMATIC ET 200 a wide range of
distributed I/O systems is available ?C for solutions in
the control cabinet or without a control cabinet
directly at the machine, ready to be integrated into any
automation solution via PROFIBUS or
PROFINET.
ET 200S - CPU protection rating IP
20
The IM 151-7 CPU for the ET 200S system can be
used in stand-alone mode as well as for distributed
automation solutions with a medium-sized program. It
corresponds to a CPU 314 and enables distributed
preprocessing of the production data locally - even in
the failsafe version. It communicates with the
higher-level programmable controller over the coexistent
MPI/PROFIBUS DP slave interface.
ET 200pro - CPU protection rating IP
65/67
The interface module IM154-8 CPU with CPU
functionality is based on the
CPU 315-2 PN/DP and
offers the same quantitative framework and functions.
The IM154-8 CPU has one combined MPI/PROFIBUS DP
interface and one PROFINET interface with three
ports.
The IM 154-8 CPU supports both PROFINET IO (up
to 128 IO devices can be connected) and PROFINET CBA, as
well as PROFIBUS DP (as master for up to 124
slaves).
More Detail of Siemens PLC /
Simatic PLC, Please visit Siemens
Automation page:
http://www.automation.siemens.com/simatic/controller/html_76/produkte/modular-controllers.htm
Back to top
| | |
|
Siemens Micromaster
Inverters (MM420 / MM430 / MM440)
|
 Low-Voltage Inverters
MicroMaster Inverters MM4
Series...
Our frequency inverters combine the
highest technical quality with versatile functionality:
from the basic MICROMASTER 420 to the
high-performance MICROMASTER 440 with sensorless
vector control and a power range up to 250 kW (300 HP).
Each individual member of our MICROMASTER family
is characterized by its exceptionally simple handling:
from installation and commissioning to operator control.
Later adaptation to new requirements is simplicity
itself.
Each frequency
inverter belonging to the family allows flexible
circuit connection of inputs and outputs for optimum
link-up of a broad variety of digital and analog
signals. With its default factory settings, it is
immediately ready for use.
Part of Totally
Integrated Automation (TIA)
All standard Siemens
drives with the PROFIBUS option are integrated in
TIA. On the basis of TIA??s three-pronged universality
with regard to communication, configuration and data
management, our drive systems perform automation tasks
smoothly and efficiently, with an energy-saving
potential of up to 30 %.
Safe Operation All
over the World
All the important protection and
overload functions are already standard features of our
inverters. And the requirements of the EU low-voltage
directive are met by all the devices in the
MICROMASTER family. They have the CE label, as
well as both UL and CUL certification. So the
MICROMASTER family has just about everything.
| MICROMASTER 440 |
0.12
to 250 kW / 0.16 to 350 HP
The
all-rounder |
| MICROMASTER 430 |
7.5 to 250 kW /
10 to 350 HP
The specialist for pumps and
fans |
| MICROMASTER 420 |
0.12 to 11 kW /
0.16 to 15 HP
The universal
inverter |
| MICROMASTER 410 |
0.12 to 0.75 kW
/ 0.16 to 1.0 HP
The low-price
solution |
More Detail about Siemens Inverters, Please
visit Siemens A&G website:
http://www.automation.siemens.com/sd/umrichter/html_76/produkte_umrichter.htm
Back to top
| | |
Siwarex Weighing Electronics Modules for Simatic
- - - Siemens Weighing
Technology
Weighing Components for Automation
Systems
With weighing systems directly integrated into the
SIMATIC automation system in either central or distributed
configurations, Siemens offers uniform solution concepts for
weighing technology. Here you find a wide range of weighing
processors (for force measurements, container, batching,
differential proportioning and bagging scales) and load cells,
including installation accessories (for force and weight measurement
for use in harsh environments). |
 |
SIWAREX U and CS now supporting
PROFINET
PROFINET is a leading standard
within the Ethernet based industrial communication. Our
weighing electronics SIWAREX U and SIWAREX CS are now
supporting this technology. The communication is realized
through appropriate Simatic CPUs and communication
modules. (7MH4910-0AA01 ,
7MH4950-1AA01 , 7MH4950-2AA01 ) |
 |
Upgrade of SIWAREX U weighing
electronics
With the beginning of March 2008
we are offering an updated SIWAREX U, including some
interesting improvements. The SIWAREX U is a versatile
weighing module for all simple weighing and force measuring
tasks. It is either used centrally in a SIMATIC S7-300 or M7
or decentrally linked via PROFIBUS-DP to an S7-400, SIMATIC S5
or systems of other manufacturers. (7MH4910-0AA01
, 7MH4950-1AA01 ) |
 |
SIWAREX FTA weighing electronics now
certified legal-for-trade across the EU
The
appropriate certificate for the SIWAREX FTA has been issued in
time for the introduction of the new European Measuring
Instruments Directive (MID) in Germany. So the SIWAREX FTA has
type-approval certificates, which are valid in all 27
countries of the European Union.
(7MH4900-2AA01)
More Detail for Siemens
Weighing Modules information:
https://pia.khe.siemens.com/index.aspx?nr=4418
Back to top
| |
|
SIMATIC
Panels
Due to their comprehensive
functionality SIMATIC Panels provide efficient operator
control and monitoring of machines and plants on
site. 
Simatic HMI - Series
70:
Simatic HMI - Series
170:
Simatic HMI - Series
270: